diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json
index ec95e5dd99d..aea117419fd 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle",
diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json
index 41577713953..e51861f40de 100644
--- a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear S1 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json
index e6e53290b3e..139d025b6b7 100644
--- a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear S1 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json
index c7b0cf5b7f0..0bbf0700f37 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json
index 0d863dbccfd..0efe00c7272 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json
index 84a6c7895bc..873af639ce7 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json
index 89664508323..1bdc4879918 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
index f1fe0ff99b5..3855f25b66a 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
index 4a3150818ab..05c348ce5ed 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json
index e8452b5c249..ffc1a0bbe7b 100644
--- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
@@ -207,6 +207,6 @@
       "0.4"
   ],
   "z_hop_types": [
-      "Auto Lift"
+      "Normal Lift"
   ]
 }
diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
index 7f2590d8d37..dba7278dd8f 100644
--- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
@@ -112,7 +112,7 @@
         "0"
     ],
   "machine_pause_gcode": "PAUSE",
-  "machine_start_gcode": ";V1.1\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
+  "machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
   "max_layer_height": [
       "0.28"
   ],
diff --git a/resources/profiles/FlyingBear/machine/fdm_machine_common.json b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
index e11e4e47e01..e6119fa451f 100644
--- a/resources/profiles/FlyingBear/machine/fdm_machine_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
@@ -113,7 +113,7 @@
         "0"
     ],
     "machine_pause_gcode": "PAUSE",
-    "machine_start_gcode": ";V1.1\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
+    "machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
     "max_layer_height": [
         "0.28"
     ],
@@ -201,6 +201,6 @@
         "0.4"
     ],
     "z_hop_types": [
-        "Auto Lift"
+        "Normal Lift"
     ]
 }
diff --git a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json
index 39001ee125a..124619ba7f9 100644
--- a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_process_common",
-    
+
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "7",
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json
index 1000d06175a..f725af6340a 100644
--- a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common",
-
+	
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "5",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json
index f24fa3ca22c..a5d9abd3a55 100644
--- a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common",
-    
+
+    "inner_wall_acceleration": "3000",
     "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "30",
     "top_shell_layers": "6",
diff --git a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json
index 8fae3c93c62..e155b9a0928 100644
--- a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json	
@@ -6,7 +6,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
-
+	
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "7",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json
index ca70860ca1f..8b72568142a 100644
--- a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json	
@@ -6,6 +6,7 @@
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
 
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "5",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json
index d19bf468349..4e8e2777104 100644
--- a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
-    
+
+    "inner_wall_acceleration": "3000",
     "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "30",
     "top_shell_layers": "6",
diff --git a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
index 0e5c4be0a92..b1ac2c11c47 100644
--- a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
+++ b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
@@ -24,7 +24,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -123,6 +123,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -130,7 +131,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",
diff --git a/resources/profiles/FlyingBear/process/fdm_process_common.json b/resources/profiles/FlyingBear/process/fdm_process_common.json
index 656bbe92ed0..43b5ade20d8 100644
--- a/resources/profiles/FlyingBear/process/fdm_process_common.json
+++ b/resources/profiles/FlyingBear/process/fdm_process_common.json
@@ -24,7 +24,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -123,6 +123,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -130,7 +131,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",