esp8266-wifi-dongle-limiter-Web.Local.yaml

substitutions:
  name: soyosource-wifi-dongle-limiter
  hostname: soyo
  device_description: "Monitor and control the WiFi version of the Soyosource GTN using the OEM WiFi dongle and control the power output on demand via RS485"
  external_components_source: github://syssi/esphome-soyosource-gtn-virtual-meter@main
  tx_pin_rs485: GPIO5
  rx_pin_rs485: GPIO14

esphome:
  name: ${hostname}
  comment: ${device_description}
  project:
    name: "syssi.esphome-soyosource-gtn-virtual-meter"
    version: 2.1.0

esp8266:
  board: esp12e

external_components:
  - source: ${external_components_source}
    refresh: 0s
  - source:
      type: local
      path: components
    components: [ soyosource_virtual_meter ]
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

ota:

web_server:
  port: 80

#logger:
#  baud_rate: 0
# level: INFO
logger:
#  level: DEBUG
  level: INFO
  logs:
    api.service: WARN
    ota: WARN
#    sensor: DEBUG
    sensor: WARN



# If you use Home Assistant please remove this `mqtt` section and uncomment the `api` component!
# The native API has many advantages over MQTT: https://esphome.io/components/api.html#advantages-over-mqtt
mqtt:
  broker: !secret mqtt_host
  username: !secret mqtt_username
  password: !secret mqtt_password
  id: mqtt_client

# api:

uart:
  - id: uart_0
    baud_rate: 9600
    tx_pin: GPIO1
    rx_pin: GPIO3
  - id: uart_1
    baud_rate: 4800
    tx_pin: ${tx_pin_rs485}
    rx_pin: ${rx_pin_rs485}
    debug:
      direction: BOTH

soyosource_modbus:
  - id: modbus0
    uart_id: uart_1
    # flow_control_pin: GPIO12

    # Optional settings
    #
    # The name is used as prefix for some log messages and should
    # help to distinguish between different instances/devices
    name: firstfloor_inverter

soyosource_virtual_meter:
  - id: virtualmeter0
    soyosource_modbus_id: modbus0
    # The state of this sensor (instantaneous power in watt) is used as source
    power_id: powermeter0

    # Optional settings
    power_sensor_inactivity_timeout: 20s
    power_demand_calculation: NEGATIVE_MEASUREMENTS_REQUIRED
    min_power_demand: 0
    max_power_demand: 1100
    zero_output_on_min_power_demand: false
    # Split/distribute the power demand if you have multiple inverters attached to the same RS485 bus
    power_demand_divider: 1
    # A positive buffer value (10) tries to avoid exporting power to the grid (demand - 10 watts)
    # A negative buffer value (-10) exports power to the grid (demand + 10 watts)
    buffer: -50
    # The operation_status_id sensor is expected here. Passing the operation_status won't work
    # The state is used to suspend the limiter if the operation status of the inverter isn't 0x0 (normal)
    operation_status_id: operation_status_id0

    # The update interval is important and defaults to 3 seconds. If the demand is sent too frequently
    # or rarely the interverter stops. TODO: Identify and validate the lower and upper update limit
    update_interval: 3s

soyosource_display:
  - id: display0
    uart_id: uart_0
    protocol_version: SOYOSOURCE_WIFI_VERSION
    update_interval: 5s

binary_sensor:
  - platform: soyosource_display
    fan_running:
      name: "${name} fan running"
    limiter_connected:
      name: "${name} limiter connected"

button:
  - platform: soyosource_display
    restart:
      name: "${name} restart"

number:
  - platform: soyosource_virtual_meter
    soyosource_virtual_meter_id: virtualmeter0
    buffer:
      name: "${name} buffer"
      initial_value: 10
      restore_value: true
    manual_power_demand:
      name: "${name} manual power demand"
      max_value: 900
    max_power_demand:
      name: "${name} max power demand"
      initial_value: 600
      max_value: 900
      restore_value: true
    power_demand_divider:
      name: "${name} power demand divider"
      initial_value: 1
      restore_value: true

  - platform: soyosource_display
    start_voltage:
      name: "${name} start voltage"
    shutdown_voltage:
      name: "${name} shutdown voltage"
    # Maximum output power in limiter mode / Output power in constant power mode
    output_power_limit:
      name: "${name} output power limit"
    start_delay:
      name: "${name} start delay"

select:
  - platform: soyosource_display
    operation_mode:
      name: "${name} operation mode"
      optionsmap:
        1: "PV"
        2: "Battery Constant Power"
        17: "PV Limit"
        18: "Battery Limit"

sensor:
  - platform: soyosource_virtual_meter
    soyosource_virtual_meter_id: virtualmeter0
    power_demand:
      name: "${name} power demand"

  - platform: soyosource_display
    error_bitmask:
      name: "${name} error bitmask"
    operation_mode_id:
      name: "${name} operation mode id"
    operation_status_id:
      name: "${name} operation status id"
      id: operation_status_id0
    battery_voltage:
      name: "${name} battery voltage"
    battery_current:
      name: "${name} battery current"
    battery_power:
      name: "${name} battery power"
    ac_voltage:
      name: "${name} ac voltage"
    ac_frequency:
      name: "${name} ac frequency"
    temperature:
      name: "${name} temperature"
    total_energy:
      name: "${name} total energy"
    output_power:
      name: "${name} output power"

  # mqtt subscribe example
  - id: powermeter0
    internal: true
    platform: mqtt_subscribe
    name: "${name} instantaneous power consumption"
    topic: "smartmeter/sensor/groundfloor/obis/1-0:16.7.0/255/value"
    accuracy_decimals: 2
    unit_of_measurement: W
    device_class: power
    filters:
      - throttle_average: 15s

#   # import smartmeter reading from homeassistant
#   # requires the "api" component see above
#   - platform: homeassistant
#     id: powermeter0
#     name: "${name} smartmeter instantaneous power"
#     entity_id: sensor.firstfloor_smartmeter_instantaneous_power
#     filters:
#       - throttle_average: 15s

switch:
  - platform: soyosource_virtual_meter
    soyosource_virtual_meter_id: virtualmeter0
    manual_mode:
      name: "${name} manual mode"
      restore_mode: RESTORE_DEFAULT_ON
    emergency_power_off:
      name: "${name} emergency power off"
      restore_mode: RESTORE_DEFAULT_OFF

text_sensor:
  - platform: soyosource_virtual_meter
    soyosource_virtual_meter_id: virtualmeter0
    operation_mode:
      name: "${name} limiter operation mode"

  - platform: soyosource_display
    errors:
      name: "${name} errors"
    operation_mode:
      name: "${name} operation mode"
    operation_status:
      name: "${name} operation status"