About jet-fetch library

jet-fetch provides a wrapper class for the fetch. It can be somehow tricky to use fetch API especially for a beginner. However, this library provides a simple way to use fetch API. The package is fully customizable using its custom method that enables you customize the whole API

Anouncing version 1.1.2 which came with a full migration to typescript, addition of tests, and support of caching for get and gets request.

The package ships with the five commonly used http methods but has room for expansion. It covers:-

GET
POST
PUT
DELETE
PATCH

The above are supported by default as they seem to be the commonly used methods.

The plugin is totally customizable and therefore can be simple to play with.

With a good knowledge of the fetch API, you can easily implement your own fashion of the library.

Installation

With npm, simply run

npm i jet-fetch

or with yarn

yarn add jet-fetch

Defaults

The library provides various defaults out of the box. All of which can also be overwritten.

Examples.

The library by default will allow cors if you do not manually set them. This can be overriden by setting cors to true and then defining your custom Access-Control-Allow-Origin which will also default to *.
Defaults to returning the response as a JSON object.

response  = {
    'response': response,
    'data': resData
}

On response, that's where you can find the response object. such as status, statusText, headers, ok, redirected, type, url, body, bodyUsed. For more about this, just read above above mentioned fetch API.

Whereas on data, that's where you can find the data object. which represents the actual data from your server.

Class instatiation.

Previous versions did not have the options, but with TypeScript, an interface of the options has been added on class instatiation.

Options.

interface Configuration {
  baseUrl: string;
  interceptWithJWTAuth?: boolean;
  token?: any;
  tokenBearerKey?: string;
  sendTokenAs?: string;
  defaultHeaders?: HeadersInit;
  cachable?: boolean;
}

Param	Default	Required	Use
baseUrl	-	false	The base url the entire package will rely on.
interceptWithJWTAuth	false	false	If true, the package will attempt attaching the jwt token as explained in the following guide
token	-	false	This can be any source of token like a function to execute to obtain, a token itself, once provided, the package won't be checking localstorage for any token, but will always refer to it for the token, for every secure request, the value of this param will be used as the jwt
sendTokenAs	'Bearer'	false	This is how the token will be sent to the backend, in short, this is how your backend expects your token and it defaults to 'Bearer' and by convention, it should be one of Bearer, Jwt, Token, but you can pass it as anything you want or empty "" to send nothing in its position
tokenBearerKey	'SecretKey'	false	Defines how the token is stored in your localstorage, this will be the key to check for in the localstorage and defaults to 'SecretKey'. This assumes that you keep your key in localStorage and you want the library to pick it for you on secure requests
defaultHeaders	{}	false	These are headers you want to be common to all requests, you can override these by re-defining the same in the subsequent request, those will overrride what you had declared on initialisation. Defaults to an empty object. Any valid fetch is allowed heres
cachable	true	false	This makes requests cached thus improving the perfomance of the request. Once its on, it adds the {'cache': 'default'} to the headers, and once turned off, it turns the same to 'no-cache'. Still this can be overriden by passing the cache header on your subsequent request headers. To globally disable caching, turn this off. However, defining the header on subsequent will turn caching back on.

Implementation

import { Jet } from 'jet-fetch'; // get the right way for importing this, but remember it is an es5+ module.

let jet = new Jet({
  baseUrl: "http://mycooldomain.com/api/";
  interceptWithJWTAuth: true;
  token: null;
  tokenBearerKey: "SecretKey";
  sendTokenAs: "Bearer";
  defaultHeaders: {};
  cachable: true;
});

With JWT Authentication in mind

The library comes with full support for JWT authentication.

Interception with JWT Authentication

We understand that most modern platforms are using Bearer Tokens or JWT or OAuth for securing their platforms therefore, the library ships in with amazing and simple to use tools for this.

Instantiating with JWT in mind

If your app is using JWT authentication, which in most cases will be stored in localstorage as Bearer, you can define your Jet class as below. If this is the case for you, then the code below is enough for you.

import {Jet} from 'jet-fetch';

const jet = new Jet({
  baseUrl = "https:your-cool-base-url.com",
  interceptWithJWTAuth = true // notice this.
})

With just the above, the library will try to load the JWT from the localstorage, send it to the backend as "Bearer <token from the localstorage>" and add to your "Authorization" header attribute.

Customising the above

If your backend, for example, does not expect the token as Bearer, maybe it expects it as Token or JWT, then your class should have an additional parameter sendTokenAs and if not defined, it will always default to Bearer.

Example:

import {Jet} from 'jet-fetch';

const jet = new Jet({
  baseUrl = "https:your-cool-base-url.com",
  interceptWithJWTAuth = true,
  sendTokenAs="Token" // notice this
})

If your token is not stored as Bearer in your localstorage, maybe you keep it as secretkey, then you call tell the package to look for that like this.

import {Jet} from 'jet-fetch';

const jet = new Jet({
  baseUrl = "https:your-cool-base-url.com",
  interceptWithJWTAuth = true,
  tokenBearerKey="secretkey" // notice this
})

NOTE: The above still expects your token to be stored in localstorage, but this is sometimes not the case, you can store you token anywhere!! The above may not help, read ahead to customise that.

Full Customising of the above

The above will work well when your token is in your localstorage.

But imagine one who is keeping this token in maybe sessionStorage, realm db or anywhere!.

Then it is also possible to define your interception with your own source of code like below. Remember this should be done on class instatiation otherwise it may break.

As long as your functionality, once executed, returns the code, the below will work fine.

import { Jet } from 'jet-fetch';

// here the user is getting the token from the sessionStorage.
let my_token = null
try{
  my_token = sessionStorage.getItem("token")
}catch(err){
  // the token is not available
}

const jet = new Jet({
  baseUrl = "https:your-cool-base-url.com",
  interceptWithJWTAuth = true,
  token = my_token // notice this
})

NOTE: When token is defined in the class, it will take precendence of the rest of the parameters you pass except interceptWithJWTAuth. Which means, the library won't be checking in your localstorage at all.

But with this last one, Remember our token will be sent as Bearer, to customize that, just like as explained above, define your sendTokenAs. in the class instantiation.

import { Jet } from 'jet-fetch';

// here the user is getting the token from the sessionStorage.
let my_token = null
try{
  my_token = sessionStorage.getItem("token")
}catch(err){
  // the token is not available
}

const jet = new Jet({
  baseUrl: "https:your-cool-base-url.com"
  token: my_token
  sendTokenAs: "JWT" // notice this
})

Turning on and off of caching.

NOTE:- Caching only works for get and gets requests and you should never any other requests.

To turn off caches, then this is enough. With this in place, for every get or gets request, then the browser will not check from the cache and won't also save the response it obtains back.

import { Jet } from 'jet-fetch';

const jet = new Jet({
 // ...
  cachable: false // notice this
})

By default caches are turned on, which implies the browser will check if there is any fresh cache (will dispose off slate caches) and return that otherwise, it will make the request to the server, obtain the response and add it to the cache for future use.

If it is not so much necessary, please leave this feature turned to true for performance enhancements.

Now, after fully defining your Jet instance, you can then export it and start using it in the rest of your application.

import { Jet } from 'jet-fetch';


//.....

export default jet;

Performing Requests --with examples

The following examples assume you have already initailized the library. For all the examples below, headers and config is optional.

GET

NOTE: `GET` requests do not support passing in the body

jet.
  get(url="users")
  .then(res => console.log(res.data))
  .catch(err => console.debug(res.response.statusText))

POST

let data = {username: "jet", password:12345}

jet.
  post("users", data,)
  .then(res => res.data)

The plugin support by default GET, PUT, POST, DELETE, PATCH as illustrated above.

Defining custom request methods

If the request method you are looking for is not provided among the top five, you can define your own request method.

/**
 * @param url is your request url to use, can be absolute or relative to the baseUrl, it will only depend on if you defined your baseUrl.
 * @param type is the request type, can be GET, HEAD etc
 * @param body is the body of your request
 * @param headers are the headers specific to this request.
 * @param configs any other fetch config options you would like to pass
 */
jet
  .custom(url, type, body?, headers?, configs?)
  .then((res) => {
    // do something with the response
  })
  .catch((err) => {
    // do something with the error
  });

All the above mentioned methods won't trigger any checking of the JWT token according to your settings, however, secure counterparts of each method have also been added. Calling these with the same data will actually trigger checking for the token and passing it in the headers as Authorization header.

The seperation is to improve the performance so that those endpoints that don't require the token should not even check for it at all.

Use the following to enable the JWT functionalities:-

import { Jet } from 'jet-fetch';
const jet = new Jet(...options);
jet.gets();
jet.posts();
jet.patchs();
jet.puts();
jet.deletes();

Note: You only pluralize the previous method by adding s -- for secure to start checking for JWT token.

This is still available on the custom method.

jet.custom(url, type, body, headers, configs, secure);

Note: The new param secure added to make a custom request that will actually check for the token. Pass this as true, omit it or pass it as false to omit checking.

Moonlight Pattern Developers.

If you're using Moonlight powered backend, the following assumptions are made.

The backend will always define a returnCode.
By default, this the returnCode will be 0.
The Server will always return a returnMessage which will be a string or null.
The Server will always return a returnData object which will be an object or null.
All requests that hit your backend will return a 200 OK status code.
Each request will define both the service and action or SERVICE and ACTION in the request body.
The backend will always return a returnCode which will be a number.
All requests are POST or GET requests.
Get requests are only meant to check the api availability, take no data and return a 200 OK status code.
Everything is pointing to the same endpoint.

Assuming your api runs on http://localhost:8000/api/:-

You can initialise your Jet instance like this:-

import { Jet } from 'jet-fetch';
const jet = new Jet({
  baseUrl: 'http://localhost:8000/api/'
});

To check the availability of your api, you can run:-

const res = await jet.checkPioniaStatusForVersion('v1/');

To make a request to your backend, you can run:-

try {
  const res = await jet.moonlightRequest({ service: 'yourService', action: 'yourAction', ...anyOtherData });
} catch (error: MoonlightError) {
  console.log(error.message);
}

For details about this, you can check the cause of the exception in the error.cause property.

console.log(JSON.parse(error.cause));

It will look like this:-

{
returnCode: number,
returnMessage: string,
...anyOtherData
}

You can then throw the error to the user or handle it in any way you want.

Customization.

This method is fully customisable and you can define your own way of handling the requests.

Defining custom error handler.

In normal cases, the helper above will just throw an error, but you can define your own error handler.

import { Jet } from 'jet-fetch';
const jet = new Jet({
  baseUrl: 'http://localhost:8000/api/', 
  moonlightErrorhandler: (error) => { // not this is a callback
    console.log(error);
  }
});

We will pass the error to this handler and the exception won't be thrown at all.

Overriding the custom success code.

In moonlight, the success code is 0, but you can override this by defining your own success code.

import { Jet } from 'jet-fetch';
const jet = new Jet({
  baseUrl: 'http://localhost:8000/api/',
  moonlightSuccessCode: 200 // not this is a number
});

Overriding internal error code.

Using this helper, when an error is raised before the request say when there is no internet connection or the server is unreachable, the library will throw an error with a cause that defines a returnCode that is equivalent to moonlightSuccessCode + 1000. This implies that the default value of moonlightSuccessCode is 0, therefore the default value of the internal error code is 1000, if you change it to 200, then the internal error code will be 1200.

However, you can define the code to be anything you want on the class instantiation.

import { Jet } from 'jet-fetch';
const jet = new Jet({
  baseUrl: 'http://localhost:8000/api/',
   internalErrorCode: 500 // not this is a number
});

Note that this won't affect the request that fail from the server as these already define their own returnCode.

Overriding the default api version targeted.

By default, the helper targets version 1 as v1/, but you can override this by defining your own version.

import { Jet } from 'jet-fetch';
const jet = new Jet({
  baseUrl: 'http://localhost:8000/api/',
});

const res = await jet.moonlightRequest({ service: 'yourService', action: 'yourAction', ...anyOtherData }, 'v2/');

Attaching extra headers to the request.

However much this can done on the class instance as already discussed above, you can also do it on the request level by defining the 3rd parameter of the moonlightRequest method.

const res = await jet.moonlightRequest({ service: 'yourService', action: 'yourAction', ...anyOtherData }, 'v2/', { 'Content-Type': 'application/json' });

Response Subscription.

In normal circumstances, the response is returned as a promise, but you can also subscribe to the response by defining the callback which will be called immediately the response is obtained as the 4th parameter of the moonlightRequest method.

const res = await jet.moonlightRequest({ service: 'yourService', action: 'yourAction', ...anyOtherData }, 'v2/', { 'Content-Type': 'application/json' }, (res) => {
        setState(res?.returnData) // you can do anything with the response here.
      });

We shall pass the response data to this callback.

Securing Moonlight Requests.

If you are using this package, they already know that it auto attaches the authentication token to the request. Usually this is done by calling same method as the normal request but with an s at the end.

However with moonlight, you can secure your request by calling the secureMoonlightRequest method.

secureMoonlightRequest takes the same parameters as the moonlightRequest method but with the ability to attach the token.

const res = await jet.secureMoonlightRequest({ service: 'yourService', action: 'yourAction', ...anyOtherData }, 'v2/', { 'Content-Type': 'application/json' }, (res) => {
        setState(res?.returnData) // you can do anything with the response here.
      });

If you're using the Pionia Framework or any other framework that uses the Moonlight pattern, then the last part of this package is for you.

Tests.

From version 1.1.2, Jest-powered tests were added to the package and to run them, just run :-

yarn test

or

npm run test

Good luck with the new way of having fun with APIs.

Most of the scenarios are summarised in 7 tests, which by end will have run every single line of the package thus being bug-free.

Contributing

Thanks to those that have tested the Plugin and contributed and we still welcome more..!

Please get started by reading through our contributing guide

To contribute, fork this repo, make your changes, test them and then make a pull request.

License

MIT LICENSE

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

About jet-fetch library

Installation

Defaults

Class instatiation.

Implementation

With JWT Authentication in mind

Interception with JWT Authentication

Instantiating with JWT in mind

Customising the above

Full Customising of the above

Turning on and off of caching.

Performing Requests --with examples

GET

NOTE: `GET` requests do not support passing in the body

POST

Defining custom request methods

Moonlight Pattern Developers.

Customization.

Defining custom error handler.

Overriding the custom success code.

Overriding internal error code.

Overriding the default api version targeted.

Attaching extra headers to the request.

Response Subscription.

Securing Moonlight Requests.

Tests.

Contributing

License

Files

README.md

Latest commit

History

README.md

File metadata and controls

About jet-fetch library

Installation

Defaults

Class instatiation.

Implementation

With JWT Authentication in mind

Interception with JWT Authentication

Instantiating with JWT in mind

Customising the above

Full Customising of the above

Turning on and off of caching.

Performing Requests --with examples

GET

NOTE: GET requests do not support passing in the body

POST

Defining custom request methods

Moonlight Pattern Developers.

Customization.

Defining custom error handler.

Overriding the custom success code.

Overriding internal error code.

Overriding the default api version targeted.

Attaching extra headers to the request.

Response Subscription.

Securing Moonlight Requests.

Tests.

Contributing

License

NOTE: `GET` requests do not support passing in the body