forked from Aircoookie/WLED
-
-
Notifications
You must be signed in to change notification settings - Fork 75
/
Copy pathplatformio.ini
2854 lines (2599 loc) · 137 KB
/
platformio.ini
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
; PlatformIO Project Configuration File
; Please visit documentation: https://docs.platformio.org/page/projectconf.html
[platformio]
# ------------------------------------------------------------------------------
# ENVIRONMENTS
#
# Please uncomment one of the lines below to select your board(s)
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
# ------------------------------------------------------------------------------
# CI binaries
;; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi
# Release binaries
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
# Build everything
; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0_6-rev2, codm-controller-0_6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
# Single binaries (uncomment your board)
; default_envs = elekstube_ips
; default_envs = nodemcuv2
; default_envs = esp8266_2m
; default_envs = esp01_1m_full
; default_envs = esp07
; default_envs = d1_mini
; default_envs = heltec_wifi_kit_8
; default_envs = h803wf
; default_envs = d1_mini_debug
; default_envs = d1_mini_ota
; default_envs = esp32dev
; default_envs = esp8285_4CH_MagicHome
; default_envs = esp8285_H801
; default_envs = d1_mini_5CH_Shojo_PCB
; default_envs = wemos_shield_esp32
; default_envs = m5atom
; default_envs = esp32_eth
; default_envs = esp32dev_qio80
; default_envs = esp32_eth_ota1mapp
; default_envs = esp32s2_saola
; default_envs = esp32c3dev
; default_envs = lolin_s2_mini
; default_envs = esp32s3dev_16MB_PSRAM_opi
; MoonModules entries
; ===================
default_envs =
esp32_4MB_S ;; experimental, optimized for speed
esp32_4MB_M ;; esp32 recommended default
esp32_4MB_M_eth
esp32_4MB_M_debug
esp32_4MB_XL
; esp32_16MB_S ;; experimental, optimized for speed
esp32_16MB_M ;; esp32 recommended for boards with 16MB flash
esp32_16MB_M_eth
; esp32_16MB_M_debug
; esp32_16MB_XL
esp32_pico_4MB_M
;;
wemos_shield_esp32_4MB_M
; wemos_shield_esp32_4MB_ICS4343x_M
; wemos_shield_esp32_4MB_SPM1423_M
; wemos_shield_esp32_4MB_LineIn_M
; wemos_shield_esp32_16MB_M
; wemos_shield_esp32_16MB_ICS4343x_M
; wemos_shield_esp32_16MB_SPM1423_M
; wemos_shield_esp32_16MB_SPM1423_XL
; wemos_shield_esp32_16MB_LineIn_M
;;
esp32_4MB_V4_S ;; experimental; HUB75 supported
esp32_4MB_V4_HUB75_forum ;; experimental; HUB75 supported (forum pinout)
esp32_16MB_V4_S ;; experimental - optimized for speed; HUB75 supported
esp32_16MB_V4_M ;; experimental; HUB75 supported
; esp32_16MB_V4_M_debug ;; experimental
; esp32_pico_4MB_V4_S ;; experimental - may work better in case you experience wifi connectivity problems
;;
esp32_4MB_PSRAM_S ;; WROVER experimental; HUB75 supported
; esp32_4MB_PSRAM_REV3_S ;; WROVER-E experimental, optimized for WROVER-E with "revision3" chip
;;
esp32S3_4MB_S ;; for HD-WF2 (HUB75 supported)
esp32S3_8MB_S ;; experimental, optimized for speed, HUB75 supported
esp32S3_8MB_M ;; HUB75 supported
esp32S3_4MB_PSRAM_S ;; for lolin s3 mini, S3 zero, S3 super mini - optimized for speed (no HUB75 support)
esp32S3_4MB_PSRAM_M ;; for lolin s3 mini, S3 zero, S3 super mini (no HUB75 support)
esp32S3_8MB_PSRAM_M ;; experiemental; HUB75 supported
esp32S3_16MB_PSRAM_M_HUB75 ;; for S3 with 16MB flash, HUB75 supported (MOONHUB HUB75 adapter board)
esp32S3_WROOM-2_M ;; for S3 WROOM-2; HUB75 supported
;;
esp32s2_PSRAM_S ;; OTA-compatible with upstream
esp32s2_PSRAM_M ;; for lolin S2 mini
;; esp32s2_tinyUF2_PSRAM_S ;; experimental - only for adafruit -S2 boards with tinyUF2 bootloader !!!
;;
esp32c3dev_2MB_M ;; experimental - 2MB Flash, no OTA
esp32c3dev_4MB_M ;; experimental
esp32c3mini_dio_4MB_M ;; for boards that need "dio" flash mode (instead of qio)
seeed_esp32c3_4MB_S ;; experimental
;;
esp8266_2MB_S
esp8266_4MB_S ;; recommended for 8266 with audio sync
esp8266_4MB_M
; esp8266pro_16MB_S
esp8266pro_16MB_M
esp01_1MB_S
;;
athom_music_esp32_4MB_M
adafruit_matrixportal_esp32s3_tinyUF2 ;; HUB75 supported, uses adafruit bootloader
; adafruit_matrixportal_esp32s3_legacy ;; try this if the "tinyUF2" firmware doesn't run on your board
; Go to MoonModules environments for environments
src_dir = ./wled00
data_dir = ./wled00/data
build_cache_dir = ~/.platformio/buildcache
extra_configs =
platformio_override.ini
[common]
# ------------------------------------------------------------------------------
# PLATFORM:
# !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
#
# arduino core 2.6.3 = platformIO 2.3.2
# arduino core 2.7.0 = platformIO 2.5.0
# ------------------------------------------------------------------------------
arduino_core_2_6_3 = [email protected]
arduino_core_2_7_4 = [email protected]
arduino_core_3_0_0 = [email protected]
arduino_core_3_2_0 = [email protected]
arduino_core_4_1_0 = [email protected]
arduino_core_3_1_2 = [email protected]
# Development platforms
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
# Platform to use for ESP8266
platform_wled_default = ${common.arduino_core_3_1_2}
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
#platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
platform_packages = platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
platformio/tool-esptool #@ ~1.413.0
platformio/tool-esptoolpy #@ ~1.30000.0
## previous platform for 8266, in case of problems with the new one
## you'll need makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_2_0, which does not support Ucs890x
;; platform_wled_default = ${common.arduino_core_3_2_0}
;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
;; platformio/toolchain-xtensa @ ~2.40802.200502
;; platformio/tool-esptool @ ~1.413.0
;; platformio/tool-esptoolpy @ ~1.30000.0
# ------------------------------------------------------------------------------
# FLAGS: DEBUG
# esp8266 : see https://docs.platformio.org/en/latest/platforms/espressif8266.html#debug-level
# esp32 : see https://docs.platformio.org/en/latest/platforms/espressif32.html#debug-level
# ------------------------------------------------------------------------------
debug_flags = -D DEBUG=1 -D WLED_DEBUG
-DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM ;; for esp8266
-DARDUINOJSON_DEBUG=1 ;; WLEDMM: this enables some debug asserts in arduinoJSON
# if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
# -DDEBUG_ESP_CORE is not working right now
# ------------------------------------------------------------------------------
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
# ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
# ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
#
# Available lwIP variants (macros):
# -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default)
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
#
# BearSSL performance:
# When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
#
# BearSSL ciphers:
# When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
# TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
# TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
# TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
# TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
# This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
# ------------------------------------------------------------------------------
build_flags =
-Wno-attributes
-DMQTT_MAX_PACKET_SIZE=1024
-DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
-DBEARSSL_SSL_BASIC
-D CORE_DEBUG_LEVEL=0
;; WLEDMM espressif docs say NDEBUG is not recommended. see https://docs.espressif.com/projects/esp-idf/en/v4.4.4/esp32/api-guides/performance/speed.html#not-recommended
-D NDEBUG ;; however it seems neecessary for non-V4 builds, to avoid spurious "assert" crashes inside the wifi core.
-Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
#build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
-D _IR_ENABLE_DEFAULT_=false
-D DECODE_HASH=true
-D DECODE_NEC=true
-D DECODE_SONY=true
-D DECODE_SAMSUNG=true
-D DECODE_LG=true
-D FASTLED_NO_FASTLED
;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
-DWLED_USE_MY_CONFIG
; -D USERMOD_SENSORSTOMQTT
#For ADS1115 sensor uncomment following
; -D USERMOD_ADS1115
build_unflags =
build_flags_esp8266 = ${common.build_flags} ${esp8266.build_flags}
build_flags_esp32 = ${common.build_flags} ${esp32.build_flags}
build_flags_esp32_V4= ${common.build_flags} ${esp32_idf_V4.build_flags}
ldscript_1m128k = eagle.flash.1m128.ld
ldscript_2m512k = eagle.flash.2m512.ld
ldscript_2m1m = eagle.flash.2m1m.ld
ldscript_4m1m = eagle.flash.4m1m.ld
;; WLEDMM: additional partion layouts for 8266 "pro" with 8MB or 16MB. On 8266 the max program size is always 1MB
ldscript_auto = eagle.flash.auto.ld
ldscript_8m6m = eagle.flash.8m6m.ld
ldscript_16m14m = eagle.flash.16m14m.ld
[scripts_defaults]
extra_scripts =
pre:pio-scripts/set_version.py
pre:pio-scripts/build-html.py
post:pio-scripts/output_bins.py
post:pio-scripts/strip-floats.py
pre:pio-scripts/user_config_copy.py
; post:pio-scripts/obj-dump.py ;; convenience script to create a disassembly dump of the firmware (hardcore debugging)
# ------------------------------------------------------------------------------
# COMMON SETTINGS:
# ------------------------------------------------------------------------------
[env]
framework = arduino
board_build.flash_mode = dout
monitor_speed = 115200
# slow upload speed (comment this out with a ';' when building for development use)
upload_speed = 115200
# fast upload speed (remove ';' when building for development use)
; upload_speed = 921600
# ------------------------------------------------------------------------------
# LIBRARIES: required dependencies
# Please note that we don't always use the latest version of a library.
#
# The following libraries have been included (and some of them changed) in the source:
# ------------------------------------------------------------------------------
lib_compat_mode = strict
lib_deps =
fastled/FastLED @ 3.6.0
;; fastled/FastLED @ 3.7.1
;; https://github.com/softhack007/FastLED.git#ESP32-C6 ;; patched version needed for -C6
IRremoteESP8266 @ 2.8.2
;;makuna/NeoPixelBus @ 2.7.5 ;; WLEDMM will be added in board specific sections
https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1 ;; newer with bugfixes and stability improvements
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
#TFT_eSPI
#For compatible OLED display uncomment following
#U8g2 #@ ~2.33.15
#For Dallas sensor uncomment following
#OneWire @ ~2.3.7
#For BME280 sensor uncomment following
#BME280 @ ~3.0.0
; adafruit/Adafruit BMP280 Library @ 2.1.0
; adafruit/Adafruit CCS811 Library @ 1.0.4
; adafruit/Adafruit Si7021 Library @ 1.4.0
#For ADS1115 sensor uncomment following
; adafruit/Adafruit BusIO @ 1.13.2
; adafruit/Adafruit ADS1X15 @ 2.4.0
extra_scripts = ${scripts_defaults.extra_scripts}
[esp8266]
build_flags =
-DESP8266
-DFP_IN_IROM
;-Wno-deprecated-declarations
;-Wno-register ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
-Wno-misleading-indentation
; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
-DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
; lwIP 2 - Higher Bandwidth no Features
; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
-DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
; VTABLES in Flash
-DVTABLES_IN_FLASH
; restrict to minimal mime-types
-DMIMETYPE_MINIMAL
; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html)
; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown
-D USERMOD_AUDIOREACTIVE
-D NON32XFER_HANDLER ;; ask forgiveness for PROGMEM misuse
lib_deps =
#https://github.com/lorol/LITTLEFS.git
ESPAsyncTCP @ 1.2.2
ESPAsyncUDP
;; makuna/NeoPixelBus @ 2.6.9 ;; WLEDMM use if you have problems with 2.7.5
makuna/NeoPixelBus @ 2.7.5
${env.lib_deps}
;; compatibilty flags - same as 0.14.0 which seems to work better on some 8266 boards. Not using PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48
build_flags_compat =
-DESP8266
-DFP_IN_IROM
;;-Wno-deprecated-declarations
-Wno-misleading-indentation
;;-Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
-DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
-DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
-DVTABLES_IN_FLASH
-DMIMETYPE_MINIMAL
-DWLED_SAVE_IRAM ;; needed to prevent linker error
;; this platform version was used for WLED 0.14.0
platform_compat = [email protected]
platform_packages_compat =
platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
platformio/tool-esptool #@ ~1.413.0
platformio/tool-esptoolpy #@ ~1.30000.0
;; experimental - for using older NeoPixelBus 2.7.9
lib_deps_compat =
ESPAsyncTCP @ 1.2.2
ESPAsyncUDP
ESP8266PWM
fastled/FastLED @ 3.6.0
IRremoteESP8266 @ 2.8.2
makuna/NeoPixelBus @ 2.7.9
https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
[esp32]
#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
platform = [email protected]
platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4
build_flags = -g
-DARDUINO_ARCH_ESP32
#-DCONFIG_LITTLEFS_FOR_IDF_3_2
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
#use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
-D LOROL_LITTLEFS
; -D WLEDMM_TWOPATH ;; use I2S1 as the second bus --> ~15% faster on "V3" builds - may flicker a bit more
; -D WLEDMM_SLOWPATH ;; don't use I2S for LED bus
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv ;; WLED standard for 4MB flash: 1.4MB firmware, 1MB filesystem
;default_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; WLEDMM alternative for 4MB flash: 1.8MB firmware, 256KB filesystem (esptool erase_flash needed before changing)
tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem, coredump support
large_partitions = tools/WLED_ESP32_8MB.csv
extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv
lib_deps =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ;; WLEDMM this must be first in the list, otherwise Aircoookie/ESPAsyncWebServer pulls in an older version of AsyncTCP !!
; https://github.com/lorol/LITTLEFS.git
; WLEDMM specific: use patched version of lorol LittleFS
https://github.com/softhack007/LITTLEFS-threadsafe.git#master
makuna/NeoPixelBus @ 2.7.5
;; makuna/NeoPixelBus @ 2.7.9 ;; experimental
${env.lib_deps}
;; Compatibility with upstream --> you should prefer using ${common_mm.build_flags_S} and ${common_mm.lib_deps_S}
AR_build_flags = ${common_mm.AR_build_flags}
AR_lib_deps = ${common_mm.AR_lib_deps} ;; optimized version, 10% faster on -S2/-C3
;; WLEDMM begin
;; ** For compiling with latest Frameworks (IDF4.4.x and arduino-esp32 v2.0.x) **
;;; previous standard V4 platform
platformV4_pre = [email protected]
platformV4_packages_pre =
toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
;;; standard V4 platform
platformV4 = espressif32@ ~6.3.2
platformV4_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
;;; experimental: latest V4 platform with latest arduino-esp32 2.0.14 + ESP-IDF 4.4.6 (may or may not work)
platformV4_xp = espressif32@ ~6.5.0
platformV4_packages_xp = platformio/framework-arduinoespressif32 @ 3.20014.231204 ;; arduino-esp32 2.0.14
build_flagsV4 = -g
-DARDUINO_ARCH_ESP32 -DESP32
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
; -D WLEDMM_TWOPATH ;; use I2S1 as the second bus --> slightly faster on some setups
; -D WLEDMM_SLOWPATH ;; don't use I2S for LED bus
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-D NO_GFX ; Disable the use of Adafruit_GFX by the HUB75 driver
;;; V4.4.x libraries (without LOROL_LITTLEFS; with newer NeoPixelBus)
lib_depsV4 =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ;; WLEDMM this must be first in the list, otherwise Aircoookie/ESPAsyncWebServer pulls in an older version of AsyncTCP !!
makuna/NeoPixelBus @ 2.7.5
;; makuna/NeoPixelBus @ 2.7.9 ;; experimental
${common_mm.HUB75_lib_deps}
${env.lib_deps}
;; WLEDMM end
[esp32_idf_V4]
;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already.
;;
;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
;; platform = espressif32@ ~6.3.2
;; platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.06.02/platform-espressif32.zip ;; Tasmota Arduino Core 2.0.9 with IPv6 support, based on IDF 4.4.4
platform_packages =
build_unflags = ${common.build_unflags}
build_flags = -g
-Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
-DARDUINO_ARCH_ESP32 -DESP32
#-DCONFIG_LITTLEFS_FOR_IDF_3_2
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
; -D WLEDMM_TWOPATH ;; use I2S1 as the second bus --> slightly faster on some setups
; -D WLEDMM_SLOWPATH ;; don't use I2S for LED bus
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
lib_deps =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
makuna/NeoPixelBus @ 2.7.5
;; makuna/NeoPixelBus @ 2.7.9 ;; experimental
${env.lib_deps}
[esp32s2]
;; generic definitions for all ESP32-S2 boards
;; platform = [email protected]
;; platform_packages =
;; toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
;; toolchain-xtensa-esp32s2 @ 8.4.0+2021r2-patch5
;; standard platform
platform = espressif32@ ~6.3.2
platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
;; tasmota platform (optional)
;; platform = ${esp32_idf_V4.platform}
;; platform_packages = ${esp32_idf_V4.platform_packages}
board_build.flash_mode = dio ;; prevents build error: sdkconfig.h: No such file or directory
build_flags = -g
-DARDUINO_ARCH_ESP32 -DESP32 ;; WLEDMM
-DARDUINO_ARCH_ESP32S2
-DCONFIG_IDF_TARGET_ESP32S2=1
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=8614 ;; WLEDMM increase stack by 1Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
-DCO
-DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
;; ARDUINO_USB_CDC_ON_BOOT
lib_deps =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
;; makuna/NeoPixelBus @ 2.7.5 ;; standard
makuna/NeoPixelBus @ 2.7.9 ;; experimental - reduces LED glitches on -S2
${env.lib_deps}
[esp32c3]
;; generic definitions for all ESP32-C3 boards
platform = ${esp32_idf_V4.platform}
platform_packages = ${esp32_idf_V4.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = -g
-DARDUINO_ARCH_ESP32 -DESP32 ;; WLEDMM
-DARDUINO_ARCH_ESP32C3
-DCONFIG_IDF_TARGET_ESP32C3=1
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-DCO
-DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
;; ARDUINO_USB_CDC_ON_BOOT
lib_deps =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
makuna/NeoPixelBus @ 2.7.5
;; makuna/NeoPixelBus @ 2.7.9 ;; experimental
${env.lib_deps}
[esp32s3]
;; generic definitions for all ESP32-S3 boards
platform = ${esp32_idf_V4.platform}
platform_packages = ${esp32_idf_V4.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = -g
-DESP32
-DARDUINO_ARCH_ESP32
-DARDUINO_ARCH_ESP32S3
-DCONFIG_IDF_TARGET_ESP32S3=1
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
-DWLEDMM_NO_SERIAL_WAIT ;; WLEDMM don't wait for serial on -S3 (unless WLED_DEBUG is set)
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
-DCO
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
lib_deps =
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
makuna/NeoPixelBus @ 2.7.5
;; makuna/NeoPixelBus @ 2.7.9 ;; experimental
${env.lib_deps}
# ------------------------------------------------------------------------------
# WLED BUILDS
# ------------------------------------------------------------------------------
[env:nodemcuv2]
board = nodemcuv2
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
lib_deps = ${esp8266.lib_deps}
monitor_filters = esp8266_exception_decoder
[env:nodemcuv2_160]
extends = env:nodemcuv2
board_build.f_cpu = 160000000L
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266_160 #-DWLED_DISABLE_2D
[env:esp8266_2m]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02
lib_deps = ${esp8266.lib_deps}
[env:esp8266_2m_160]
extends = env:esp8266_2m
board_build.f_cpu = 160000000L
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02_160
;WLEDMM: see below
; [env:esp01_1m_full]
; board = esp01_1m
; platform = ${common.platform_wled_default}
; platform_packages = ${common.platform_packages}
; board_build.ldscript = ${common.ldscript_1m128k}
; build_unflags = ${common.build_unflags}
; build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
; ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM
; lib_deps = ${esp8266.lib_deps}
; [env:esp01_1m_full_160]
; extends = env:esp01_1m_full
; board_build.f_cpu = 160000000L
; build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01_160 -D WLED_DISABLE_OTA
; ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM
[env:esp07]
board = esp07
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}
[env:d1_mini]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
upload_speed = 921600
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}
monitor_filters = esp8266_exception_decoder
[env:heltec_wifi_kit_8]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}
[env:h803wf]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}
[env:esp32dev]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}
[env:esp32dev_qio80]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio
[env:esp32dev_V4_dio80]
;; experimental ESP32 env using ESP-IDF V4.4.x
;; Warning: this build environment is not stable!!
;; please erase your device before installing.
board = esp32dev
platform = ${esp32_idf_V4.platform}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32_idf_V4.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32_idf_V4.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = dio
[env:esp32_eth]
board = esp32-poe
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
upload_speed = 921600
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
lib_deps = ${esp32.lib_deps}
board_build.partitions = ${esp32.default_partitions}
[env:esp32s2_saola]
board = esp32-s2-saola-1
platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
platform_packages =
framework = arduino
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
board_build.flash_mode = qio
upload_speed = 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
-DARDUINO_USB_CDC_ON_BOOT=1
lib_deps = ${esp32s2.lib_deps}
;; WLEDMM: use WLEDMM build environments
;; [env:esp32_wrover]
;; extends = esp32_idf_V4
;; platform = ${esp32_idf_V4.platform}
;; platform_packages = ${esp32_idf_V4.platform_packages}
;; board = ttgo-t7-v14-mini32
;; board_build.f_flash = 80000000L
;; board_build.flash_mode = qio
;; board_build.partitions = ${esp32.extended_partitions}
;; build_unflags = ${common.build_unflags}
;; build_flags = ${common.build_flags_esp32_V4} -D WLED_RELEASE_NAME=ESP32_WROVER
;; -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
;; -D LEDPIN=25
;; ; ${esp32.AR_build_flags}
;; lib_deps = ${esp32_idf_V4.lib_deps}
;; ; ${esp32.AR_lib_deps}
[env:esp32c3dev]
extends = esp32c3
platform = ${esp32c3.platform}
framework = arduino
board = esp32-c3-devkitm-1
board_build.partitions = ${esp32.default_partitions}
build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3
-D WLED_WATCHDOG_TIMEOUT=0
-DLOLIN_WIFI_FIX ; seems to work much better with this
-DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
;-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
upload_speed = 460800
build_unflags = ${common.build_unflags}
lib_deps = ${esp32c3.lib_deps}
board_build.flash_mode = qio
[env:esp32s3dev_8MB]
;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
board = esp32-s3-devkitc-1
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600 ; or 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
;-D WLED_DEBUG
lib_deps = ${esp32s3.lib_deps}
${esp32.AR_lib_deps}
board_build.partitions = ${esp32.large_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio
; board_build.flash_mode = dio ;; try this if you have problems at startup
monitor_filters = esp32_exception_decoder
[env:esp32s3dev_8MB_PSRAM_opi]
;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
-D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
lib_deps = ${esp32s3.lib_deps}
${esp32.AR_lib_deps}
board_build.partitions = ${esp32.large_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio
monitor_filters = esp32_exception_decoder
[env:esp32s3dev_16MB_PSRAM_opi]
extends = env:esp32s3dev_8MB_PSRAM_opi
board_build.partitions = tools/WLED_ESP32_16MB.csv
board_upload.flash_size = 16MB
[env:esp32s3dev_8MB_PSRAM_qspi]
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
extends = env:esp32s3dev_8MB_PSRAM_opi
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
[env:esp8285_4CH_MagicHome]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
lib_deps = ${esp8266.lib_deps}
[env:esp8285_H801]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
lib_deps = ${esp8266.lib_deps}
[env:d1_mini_5CH_Shojo_PCB]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
lib_deps = ${esp8266.lib_deps}
# ------------------------------------------------------------------------------
# DEVELOPMENT BOARDS
# ------------------------------------------------------------------------------
[env:d1_mini_debug]
board = d1_mini
build_type = debug
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
lib_deps = ${esp8266.lib_deps}
[env:d1_mini_ota]
board = d1_mini
upload_protocol = espota
# exchange for your WLED IP
upload_port = "10.10.1.27"
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}
[env:anavi_miracle_controller]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
lib_deps = ${esp8266.lib_deps}
[env:lolin_s2_mini]
platform = ${esp32s2.platform}
platform_packages = ${esp32s2.platform_packages}
board = lolin_s2_mini
board_build.partitions = ${esp32.default_partitions}
board_build.flash_mode = dio ;; prevents build error: sdkconfig.h: No such file or directory
build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1
;; board_build.flash_mode = qio
;; board_build.f_flash = 80000000L
build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2
-DBOARD_HAS_PSRAM
-DARDUINO_USB_CDC_ON_BOOT=1 # try disabling and enabling unflag above in case of board-specific issues, will disable Serial
-DARDUINO_USB_MSC_ON_BOOT=0
-DARDUINO_USB_DFU_ON_BOOT=0
-DLOLIN_WIFI_FIX ; seems to work much better with this
-D WLED_USE_PSRAM
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 6792 bytes FLASH
-D WLED_WATCHDOG_TIMEOUT=0
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D LEDPIN=16
-D BTNPIN=18
-D RLYPIN=9
-D IRPIN=7
-D HW_PIN_SCL=35
-D HW_PIN_SDA=33
-D HW_PIN_CLOCKSPI=7
-D HW_PIN_MOSISPI=11 ;WLEDMM renamed from HW_PIN_DATASPI
-D HW_PIN_MISOSPI=9
; -D STATUSLED=15
lib_deps = ${esp32s2.lib_deps}
# ------------------------------------------------------------------------------
# custom board configurations
# ------------------------------------------------------------------------------
[env:esp32c3dev_2MB]
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
;; this board need a specific partition file. OTA not possible.
extends = esp32c3
platform = ${esp32c3.platform}
platform_packages = ${esp32c3.platform_packages}
board = esp32-c3-devkitm-1
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
-D WLED_WATCHDOG_TIMEOUT=0
-D WLED_DISABLE_OTA
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
build_unflags = ${common.build_unflags}
upload_speed = 115200
lib_deps = ${esp32c3.lib_deps}
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
board_build.flash_mode = dio
board_upload.flash_size = 2MB
board_upload.maximum_size = 2097152
;WLEDMM: see below
; [env:wemos_shield_esp32]
; board = esp32dev
; platform = ${esp32.platform}
; platform_packages = ${esp32.platform_packages}
; upload_speed = 460800
; build_unflags = ${common.build_unflags}
; build_flags = ${common.build_flags_esp32}
; -D LEDPIN=16
; -D RLYPIN=19
; -D BTNPIN=17
; -D IRPIN=18
; -U WLED_USE_MY_CONFIG
; -D USERMOD_DALLASTEMPERATURE
; -D USERMOD_FOUR_LINE_DISPLAY
; -D TEMPERATURE_PIN=23
; -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
; -D USERMOD_AUDIOREACTIVE
; lib_deps = ${esp32.lib_deps}
; OneWire@~2.3.5
; olikraus/U8g2 @ ^2.28.8
; https://github.com/blazoncek/arduinoFFT.git
; board_build.partitions = ${esp32.default_partitions}
[env:m5atom]
board = esp32dev
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
lib_deps = ${esp32.lib_deps}
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
board_build.partitions = ${esp32.default_partitions}
[env:sp501e]
board = esp_wroom_02
platform = ${common.platform_wled_default}
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
lib_deps = ${esp8266.lib_deps}
[env:sp511e]
board = esp_wroom_02
platform = ${common.platform_wled_default}
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
lib_deps = ${esp8266.lib_deps}
[env:Athom_RGBCW] ;7w and 5w(GU10) bulbs
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
lib_deps = ${esp8266.lib_deps}
[env:Athom_15w_RGBCW] ;15w bulb
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
lib_deps = ${esp8266.lib_deps}
[env:Athom_3Pin_Controller] ;small controller with only data
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}
[env:Athom_4Pin_Controller] ; With clock and data interface
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}
[env:Athom_5Pin_Controller] ;Analog light strip controller
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}
[env:MY9291]
board = esp01_1m
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
lib_deps = ${esp8266.lib_deps}
# ------------------------------------------------------------------------------
# codm pixel controller board configurations
# codm-controller-0_6 can also be used for the TYWE3S controller
# ------------------------------------------------------------------------------
[env:codm-controller-0_6]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}