- Set up your SSH key
- Log into your Pi with Root
- Set up Tor
Follow these steps to create your SSH key:
NOTE: With cat ~/.ssh/id_rsa* you can check your SSH key pair. Both parts (private and public) of your recently created SSH key should show up. Please be sure that your (private) key is protected by a passphrase and has been created on your computer; not on the Raspberry Pi.
A trick to whether github is configured correctly is to navigate to https://github.com/<yourgithubusername>.keys in a browser - your public SSH key should show up there.
NOTE: Be sure not to confuse the public SSH key and the key fingerprint. The fingerprint of a key is unique and used to identify the key.
SSH keys are stored in a ~/.ssh directory. You will need to find a set of files looking like id_dsa or id_rsa (your private key or key fingerprint) and a complimentary .pub file (your public key).
This is the key fingerprint format: SHA256:PqNGgIJfgjnoq9JMd2czLPAevkAzr4OIKb22GxMZg1M [email protected].
However, the public keys are similar to this:
$ cat ~/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEArMkyotKz1J5+Kux3ToBNe+X3Qm+6WzTXflEEeOWdmxDZ5f5le7Ujes81ybRnavWSNR2TGr1evigE7vGsxHm2aEeR0YICWR24lPcJ2FUROmEdwn2OjDzh1YcKJDNvlMzXt1x0dNeEkSisHpk6p5RJ7OfCtyD/OjKhGyajbxS/n3RDSMgND46M7AiiaaIzlut3D09Gyhd93t16NTyR9Ej1RRRk8z9of3qLwhC1AqVJpSkuWn9+q111AfljsVZCHHDLw0+j7NIntk5x+yzrl2QQECNEaPpm1Pt4gmLG2nnrNjPAtrjWIfyWfhdSbgk/QscAE2XpCYoSFBW9d8bdIVMfSw== [email protected]
Once you start up your Raspberry Pi and find its local IP address, you can connect to it from your computer using your Terminal. Windows users should use Git Bash.
Run the following:
ssh pi@[local IP address]
When you connect through SSH for the first time, you will be prompted to accept the RSA key fingerprint, type “yes” to continue. The Pi user's default password is "raspberry". You should see something like this:
$ ssh [email protected]
The authenticity of host '192.168.0.101 (192.168.0.101)' can't be established.
ECDSA key fingerprint is SHA256:BzmwLK14V/EVa0m/0/SYFtGM/60zm7mFe5vVCWAxqe4.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.101' (ECDSA) to the list of known hosts.
Enter passphrase for key '/Users/username/.ssh/id_rsa':
Linux treehouses 4.19.58-v7+ #1245 SMP Fri Jul 12 17:25:51 BST 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Aug 15 03:24:59 2019 from 192.168.0.100
SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.
pi@treehouses:~ $NOTE: Every time you use a new image on your RPI, the known_hosts file must be updated for ssh to connect without an error. Instructions can be found on the FAQ page.
To add your SSH key to your Raspberry Pi you first need to copy your public key. Since you copied this same key to github already, you can see it by navigating with your browser to https://github.com/<yourgithubusername>.keys or by running Linux/macOS from command line you can run wget -O- -q https://github.com/<yourgithubusername>.keys.
Now you can add the public key to run: sudo treehouses sshkey add "your SSH key" (copy-paste your SSH key in between the quotes) or just sudo treehouses sshkey github adduser <yourgithubusername>.
In the future on SSH login it will ask you for your sshkey passphrase whereas before it, used the default password for pi user "raspberry".
NOTE: The above step must be done in order to log in as root user during SSH session. Not doing so may leave vulnerabilities and security issues open for your Raspberry Pi.
To log into root, you can run sudo -s while logged into the Pi user, or with the keys over SSH directly into it by running ssh root@[local IP address] instead of ssh pi@[local IP address].
To rename your Raspberry Pi, run treehouses rename "username" and replace username with your Github username.
Tor is a computer network run by volunteers worldwide. Each volunteer runs what is called a relay, which is just a computer that runs software allowing users to connect to the Internet via the Tor network.
Before hitting the open Internet, the Tor Browser will connect to several different relays, wiping its tracks each step of the way, making it difficult to figure out where, and who, you really are.
The Systems Team utilizes this tool to provide a further layer of security when interacting with the Raspberry Pis deployed in the field.
Please start by watching this video about the Tor browser.
You should already have Homebrew installed. You can check if it's already installed by running brew -v in your terminal. If you haven't yet installed it, run the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew install wget cask
Then, install Tor and Tor Browser:
brew install tor
brew cask install tor-browser
Install Tor
To activate Tor, SSH into your Raspberry Pi with root, and run treehouses tor add 22, treehouses tor add 80, and treehouses tor notice on. To view the Tor address of your Pi, run treehouses tor, then copy-paste this address into your Tor Browser, to make sure it works; you should see a configuration page for Planet Learning, one of our other services.
At the end of this section, post the code of your successful SSH terminal to the Gitter chat
It may look like this:
ssh [email protected]
The authenticity of host '192.168.0.101 (192.168.0.101)' can't be established.
ECDSA key fingerprint is SHA256:OQcmJteKgWOmNiK6OlrZ3CxC5+T/KMKowQ5qNHn9NOI.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.101' (ECDSA) to the list of known hosts.
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Aug 22 23:20:37 2019 from unknown.comcast.net
root@treehouses:~#
You can find instructions on Code and Syntax Highlighting here