Skip to content

Latest commit

 

History

History
68 lines (46 loc) · 2.83 KB

README.md

File metadata and controls

68 lines (46 loc) · 2.83 KB
Raw

Getting Started

To get started with AOSP sources to build HARP, you'll need to get familiar with Git and Repo.

To initialize your local repository using the AOSP trees to build TWRP, use a command like this:

repo init -u https://github.com/HitoriAmeRP/platform_manifest.git -b android-12.1

To initialize a shallow clone, which will save some space, use a command like this:

repo init --depth=1 -u https://github.com/HitoriAmeRP/platform_manifest.git -b android-12.1

Then to sync up:

repo sync

Then to setup the build:

 cd <source-dir>; export ALLOW_MISSING_DEPENDENCIES=true; . build/envsetup.sh; lunch twrp_<device>-eng

The build target is dependent on the device, and should reflect the location of stock recovery on the device. Issue the build command that applies to your device:

  • Recovery partition: mka recoveryimage
  • Boot image ramdisk: mka bootimage
  • Vendor_boot image ramdisk: mka vendorbootimage

Special notes for this branch

  • Device makefile in the device tree and dependencies file should use the "twrp" prefix.
  • FDE decryption is not presently supported in this branch.

Submitting Patches

Our project is open source, and patches are always welcome! You can send patches by using:

Pull request, right here on git.

Contact us at https://t.me/t25_discussions

Maintaining Authorship

Maintaining authorship is a very important aspect of working with Open Source code. If you wish to submit a patch/fix from anywhere else (another ROM, project, etc.), it is imperative that you maintain the ownership of the person whose work you are seeking to include. Doing so will ensure that credit is given where it is deserved, and the principles of open source are upheld. Your contribution to the project will still be recognized as you will forever be listed as the committer.

If you manually cherry pick a patch/fix then you will need to add the original author prior to pushing to our gerrit. This is a very easy task to perform, and is usually done after you commit a patch/fix locally. This is accomplished after you type in git commit -a , type in the commit message and save. You would then do the following:

git commit --amend --author "Author <[email protected]>"

So it should look like this once you get all of the author's information:

git commit --amend --author "Spencer McGillicuddy <[email protected]>"

Alternatively, adding as part of the original git commit message is preferred and done like the following:

git commit --author="Author <[email protected]>" -m "[commit message]"

This saves time, and when part of your normal routine, prevents the infamous "ermahgerd I forgot to add authorship - let me fix it because I was found out!" message.