Skip to content

Operation

Jump to bottom
Stephan Mühl edited this page Sep 7, 2022 · 7 revisions

If you bought the official PCB its already flashed with the latest firmware. You can flash or update the SmartPusher with the online flasher (Works with Chrome and MS Edge). With this you dont need to compile the firmware by youreself neither you need any software. https://blueforcer.github.io/SmartPusher/

When you power on the SmartPusher the first time it will enter the AP Mode photo_5244473751150642612_y

Connect your Smartphone or any other wifi device with the Accesspoint "SmartPusher". open a browser and navigate to 192.168.4.1.

Here you need to set up your Network and MQTT Broker
image

Setup timezone
https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv

Clone this wiki locally