Various modification to the Voron familiy of 3D printers
Various modification to the Ant-Micron+ (180) 3D printer
- Mount designed to be used with the Dragonburner toolhead (Version: DB8+) to mount the Beacon or equivelent bed probe.
Probe offset from nozzle tip:
Mounted to Dragonburner using 2 x M3 x 6 or 8mm BHCS/SHCP.
Nozzle to probe distance:
Note: This is 3 mm more than what is recommended by Annex Engineering for the Becon (i.e: 5-8mm)
Beacon probe is mounted to the bracket using 2 x M3 x 4 or 6 mm Low Profile screws:
Note:
- These are threaded into the plastic, do not overtighten them.
- Its higly recommended that low profile screws are used otherwise you risk damaging your bed during movement and calibration.